Close
HCom recently amalgamated with Radata and will trade as HCom... Read More
Login
Data Communication Solutions
Menu

Hi-Tec 5/8 Wave UHF/VHF Aerial

Mobile Antenna

HT-5/8
Lead time - Up to 1 week from confirmed order date

This range of 5/8 aerials offers a rugged and reliable design. VHF models are constructed from solid 6.5mm pulltruded fibreglass rod and covered with LVR heat shrink plastic. All fittings are nickel plated. The UHF model (5/8U) is formed from 2.7 mm high tensile stainless steel. A black epoxy finish version is available.

Login to see prices
SKU: HT-5/8 Categories: , , , ,

Description

The 5/8 Wave Aerials provide a nominal gain of 3dB with a low angle of radiation.

A Tilt Assembly is available for the 5/8 VHF aerial. The assembly is machined from brass, and nickel plated. It is fitted with a stainless steel load spring and components to provide corrosion free service. This assembly mounts onto the Aerial Base. See below for pricing information.
Two E band models are available, one with no tilt facility and another which enables it to be fitted to the Tilt Assembly.

The UHF model is supplied tuned for 405 MHz and is readily tuned to the other bands by trimming the top of the element as shown in the tuning chart. This tuning dimension is taken from the top of the coil. If further tuning is required, insert a power meter
in the feed line and tune for minimum reflected power.

HT 5-8 Wave VHF & UHF Aerials

Additional information

Frequency

75-80MHz, 81-88 MHz, 88-108 MHz, 117-137 MHz, 138-144 MHz, 150-156 MHz, 400-500 MHz

Tilt Mount Compatible

Yes, No

Description

The 5/8 Wave Aerials provide a nominal gain of 3dB with a low angle of radiation.

A Tilt Assembly is available for the 5/8 VHF aerial. The assembly is machined from brass, and nickel plated. It is fitted with a stainless steel load spring and components to provide corrosion free service. This assembly mounts onto the Aerial Base. See below for pricing information.
Two E band models are available, one with no tilt facility and another which enables it to be fitted to the Tilt Assembly.

The UHF model is supplied tuned for 405 MHz and is readily tuned to the other bands by trimming the top of the element as shown in the tuning chart. This tuning dimension is taken from the top of the coil. If further tuning is required, insert a power meter
in the feed line and tune for minimum reflected power.

HT 5-8 Wave VHF & UHF Aerials

Additional information

Frequency

75-80MHz, 81-88 MHz, 88-108 MHz, 117-137 MHz, 138-144 MHz, 150-156 MHz, 400-500 MHz

Tilt Mount Compatible

Yes, No